Necessary preliminary tasks
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
- Remove CYLINDER HEAD COVER
- Remove INTERMEDIATE LEVER
- Remove EXHAUST CAMSHAFT .
IMPORTANT:
Rocker arms (1) are divided into bearing categories.
The tolerance classes are marked according to the picture in numbers from 1 to 5.
Already used rocker arms (1) may only be reused in the same position.
The tolerance classes are marked according to the picture in numbers from 1 to 5.
Already used rocker arms (1) may only be reused in the same position.
Detach cam followers (1) from HVCA element and remove.
Set down all cam followers (1) in neat order in special tool 11 4 480 .
Installation:
Before installing exhaust camshaft or intermediate levers, make sure cam followers (1) are correctly seated.
Remove HVCA element (1) in direction of arrow.