LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2592 (Engine - Repair - N52 - E90) >> Cylinder Head And Cylinder Head Cover >> 11 12 000 Removing and installing/sealing cylinder head cover (N52K) >> Installation

11 12 000 Removing and installing/sealing cylinder head cover (N52K): Installation

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Replace aluminium screws. 

Fig 1: Identifying Threaded Pins And Screw Mounting Area
G04751032Courtesy of BMW OF NORTH AMERICA, INC.


Slotted sleeves (2) for guiding ignition coils in cylinder head cover (1) must be replaced.

Remove slotted sleeves (2).

Fig 1: Identifying Cylinder Head Cover And Slotted Sleeves
G04751033Courtesy of BMW OF NORTH AMERICA, INC.


Clean all sealing faces (1 and 2).

IMPORTANT: Do not use any metal-cutting tools.

Installation: 

scientia non olet · About LEMON Manuals