Necessary preliminary tasks
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
- Remove ENGINE
- Mount engine on ASSEMBLY STAND
- Remove VIBRATION DAMPER
- Remove OIL SUMP
- Remove OIL PUMP
- Remove oil pump/vacuum pump CHAIN MODULE
- Remove timing CHAIN MODULE
- Remove CYLINDER HEAD
- Remove FLYWHEEL
- Removing all PISTONS
Release screws (1).
Tightening torque 11 13 6AZ .
Installation: