11 21 Crankshaft and Bearings
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CRANKSHAFT AND BEARINGS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Hexagon screw (central screw) Hub of vibration damper to crankshaft. |
N52K | M16 x 80 | Replace screw. Screw and thread are lightly oiled. Jointing torque and angle of rotation must be observed without fail. Jointing torque Torque angle |
100 Nm 360 ° |
TIGHTENING TORQUE SPECIFICATION - CRANKSHAFT AND BEARINGS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Increment wheel on crankshaft | S54 | M5 10.9 | Replace screws Jointing torque Torque angle |
5.0 Nm 45 ° |
| Increment wheel on crankshaft | M5 10.9 | Replace screws | 13 Nm | |
| Increment wheel on crankshaft | M5 8.8 | Replace screws | 5.5 Nm |