11 61 Air intake manifold
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2011 BMW 328xi, 2011 BMW 328i, 2011 BMW 323i, 2010 BMW 328xi, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - AIR INTAKE MANIFOLD
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Hexagon screw Air intake manifold to cylinder head. | N52K | M7 x 50 | 15 Nm | |
| 2AZ Hexagon nut Air intake manifold to cylinder head. | N52K | AM7 (to DIN 439) | 15 Nm | |
| 3AZ Hose clamp Clean-air gaiter to connection, throttle valve assembly. | N52K | L80-100 | 3 Nm | |
| 4AZ Ejot screw Fuel line to intake manifold |
N52K | 50 x 20 | 6 Nm | |
| 5AZ Oval-head screw Holder, engine wiring harness, to intake manifold. |
N52K | M6 x 10 | 8 Nm |