LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2579 (Front Axle - Repair - E90/E92 (AWD)) >> 3153 Differential With Bearings >> 3153040 Removing and installing/replacing right output shaft bearing block >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2013 BMW 328xi, 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 335xi, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Remove bearing block from oil sump.

Installation: 

Replace O-RING .

Tightening torque 31 60 1AZ .

Fig 1: Identifying Bearing Block Screws
G04745236Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals