2611051 Replacing flexible disc for front propeller shaft: Installation

WARNING: This page is about a different car, the 2006 BMW 330xi and 2006 BMW 325xi. However, it is still accessible from the selected car via links, so may be relevant.

Arrows (3) on circumference of flexible disc must point to flange arms (2).
Grip mounting bolts of flexible disc at propeller shaft flange at nuts and tighten down at bolt heads.

Fig 1: Locating ZNS Bolts
Courtesy of BMW OF NORTH AMERICA, INC.

Check centering mount.

Replace damaged CENTERING MOUNT .

GREASE CENTERING MOUNT .

Fig 1: Locating Propeller Shaft Centering Mount

Courtesy of BMW OF NORTH AMERICA, INC.