Necessary preliminary tasks
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2013 BMW 328xi, 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 335xi, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
- Remove UNDERBODY COVER
Release screws (1).
Installation:
Replace screws.
Tightening torque 33 33 2AZ .
Release screw (3) and remove compression strut (2).
Installation:
Check threads for damage; if necessary, repair with HELICOIL THREAD INSERTS .
Tightening torque 33 33 1AZ .