Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2013 BMW 328xi, 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 335xi, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Remove REAR WHEEL

If necessary, open cover (1) on stoneguard (2).

Mark position of eccentric bolt to rear axle support.

Fig 1: Identifying Cover On Stoneguard

G05778394

Courtesy of BMW OF NORTH AMERICA, INC.

Release bolt.

Tightening torque 33 32 8AZ .

Installation:

If necessary, turn toe arm by hand.

Fig 2: Locating Toe Arm Bolt

G04726512

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) and remove eccentric washer (2).

Tightening torque 33 32 7AZ .

Unscrew eccentric bolt towards front and remove toe arm (3).

Installation:

Bolt head points in direction of travel.

Reinstall eccentric washer.

Replace self-locking nut.

Align eccentric bolt to rear axle support by means of marking.

Fig 3: Removing Toe Arm

G04726513

Courtesy of BMW OF NORTH AMERICA, INC.