LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2576 (Rear Axle - Repair - E90/E92 (AWD)) >> 3332 Control Arms And Struts >> 3332035 Replacing a rubber mount for trailing arm in rear axle carrier >> Removing rubber mount

Removing rubber mount

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2013 BMW 328xi, 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 335xi, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Mark installation position of rubber mount by way of slot to rear axle carrier.

Remove rubber mount using special tools 33 4 472, 33 4 474, 33 4 475, 33 4 466 and 33 4 465.

Fig 1: Removing Rubber Mount Using Special Tools
G04726498Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals