Replacing radial shaft seal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2013 BMW 328xi, 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 335xi, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

Pull out radial shaft seal with special tool 00 5 010.

Fig 1: Pulling Out Radial Shaft Seal Using Special Tool (00 5 010)

Courtesy of BMW OF NORTH AMERICA, INC.

Drive in new radial shaft seal with following special tools (depending on REAR DIFFERENTIAL ) as far as it will go.

168L: Use special tools 00 5 500 and 33 3 390
188L/188LW: Use special tools 00 5 500 and 33 3 470
215L/215LW/215 with lock: Use special tools 00 5 500 and 33 3 440

Fig 2: Installing Shaft Seal Using Special Tool
Courtesy of BMW OF NORTH AMERICA, INC.