LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2576 (Rear Axle - Repair - E90/E92 (AWD)) >> 3310 Final Drive >> 3310010 Removing and installing/replacing rear differential >> Installation sequence

Installation sequence

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2013 BMW 328xi, 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 335xi, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear differential with workshop jack and special tool 33 4 420
  2. Insert bolts (1) (do not tighten down)
  3. Insert bolt from rear and replace nut (2) (do not tighten down)
  4. Lower workshop jack
  5. Tighten down screws (1)

    Tightening torque 33 17 1AZ .

  6. Tighten nut (2)

    Tightening torque 33 17 1AZ .

    Fig 1: Supporting Rear Differential Using Workshop Jack And Special Tool (33 4 420)
    G04726445Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals