3352 Shock Absorbers
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2013 BMW 328xi, 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 335xi, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - SHOCK ABSORBERS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Shock absorber to thrust bearing | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M10 | Replace support bearing upper part | 27 Nm |
| E90/E92/E93/S65 | M14 | Replace nut | 37 Nm | ||
| 2AZ | Shock absorber to joint eye | E81/E82/E84/E87/E88/E90/E91/E92/E93/auβer S65 | M10 | Replace nut | 38 Nm |
| 3AZ | Shock absorber/joint eye to camber arm | E81/E82/E84/E87/E88/E90/E91/E92/E93/auβer S65 | M10 | Replace screws | 60 Nm |
| 4AZ | Shock absorber to camber arm | E90/E92/E93/S65 | M12 | Tighten in NORMAL position | 100 Nm |