3333 Rear Axle Suspension
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2013 BMW 328xi, 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 335xi, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - REAR AXLE SUSPENSION
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Rear axle support with rubber mounts to body | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M12 | Follow See 3331503 LOWERING/RAISING REAR AXLE CARRIER (SPECIAL TOOL SWZ00-2040) or 3331503 LOWERING/RAISING REAR AXLE CARRIER (SPECIAL TOOL SWZ00-2040) . | 100 Nm |
| 2AZ | Compression strut on body | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M10 | Replace screws | |
| Jointing torque | 47 Nm | ||||
| Torque angle | 90 ° | ||||
| 3AZ | Vibration absorber to rear axle support | E93 | M10 | 56 Nm | |
| E93 | M8 | 27 Nm | |||