3317 Rear axle final drive suspension
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2013 BMW 328xi, 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 335xi, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - REAR AXLE FINAL DRIVE SUSPENSION
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Rear differential (if nec. with bracket for vibration damper) to rear axle carrier | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M12 (front) | Observe repair instruction. | 100 Nm |
| E81/E82/E84/E87/E88/E90/E91/E92/E93 | M14 (rear) | Observe repair instruction. Replace nut |
165 Nm | ||
| 2AZ | Vibration damper to bolt connection, rear differential | E81/E82/E84/E87/E88/E90/E91/E93/E92/auβer S65 | M12 | 68 Nm | |
| 3AZ | Vibration damper on bracket | E81/E82/E84/E87/E88/E90/E91/E93/E92/auβer S65 | M12 | 68 Nm | |