3332 Handlebars and struts
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2013 BMW 328xi, 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 335xi, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - HANDLEBARS AND STRUTS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Trailing arm to rear axle support | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M12 | Replace nut. TIGHTEN DOWN BOLT CONNECTION IN NORMAL POSITION . |
100 Nm |
| 2AZ | Trailing arm to wheel carrier | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M12 | Replace nut. TIGHTEN DOWN BOLT CONNECTION IN NORMAL POSITION . |
100 Nm |
| 3AZ | Control arm to rear axle support | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M12 | Replace nut. TIGHTEN DOWN IN NORMAL POSITION . |
100 Nm |
| 4AZ | Control arm to wheel carrier | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M12 | Replace screw. TIGHTEN DOWN IN NORMAL POSITION . |
|
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 5AZ | Wishbone to rear axle support | E81/E82/E84/E87/E88/E90/E91/E92/E93, | M12 | Replace nut. TIGHTEN DOWN IN NORMAL POSITION . |
100 Nm |
| 6AZ | Wishbone to wheel carrier | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M12 | Replace screw and nut. TIGHTEN DOWN IN NORMAL POSITION . |
|
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 7AZ | Toe arm to rear axle support | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M12 | Replace nut. TIGHTEN DOWN IN NORMAL POSITION . |
100 Nm |
| 8AZ | Toe arm to wheel carrier | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M12 | TIGHTEN DOWN IN NORMAL POSITION . | 100 Nm |
| 9AZ | Camber arm to rear axle support | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M14 | Replace nut. TIGHTEN DOWN IN NORMAL POSITION . |
165 Nm |
| 10AZ | Camber arm to wheel carrier | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M14 | Replace nut. TIGHTEN DOWN IN NORMAL POSITION . |
165 Nm |
| 11AZ | Trailing link to body | E81/E82/E84/E92/auβer S65 | M8 | 24 Nm | |
| 12AZ | Trailing link to compression strut | E81/E84/E82/E92/auβer S65 | M12 | Replace screw. Jointing torque |
100 Nm |
| Angle of rotation | 90 ° | ||||