3135 Stabiliser Bar
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2013 BMW 328xi, 2012 BMW 328xi, 2011 BMW 328xi, 2010 BMW 335xi, and 2010 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - STABILISER BAR
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Retaining bar for stabiliser to front axle carrier | E81/E82/E84/E87/E90/E88/E91/E92/E93 | M8 | Replace nuts | 21 Nm |
| E90/Allrad, E91/Allrad, E92/Allrad | M10 | Replace screws | 60 Nm | ||
| E84/Allrad | M10 | Replace screws | 56 Nm | ||
| 2AZ | Stabiliser link to stabiliser/spring strut shock absorber | E81/E82/E87/E88/E90/E91/E92/E93 | M10 | Replace nut | 58 Nm |
| E84 | M10 | Replace nut | 56 Nm | ||