16 00 Fuel supply system E52: Notes
WARNING: This page is about a different car, the 2003 BMW Z8, 2002 BMW Z8, 2001 BMW Z8, and 2000 BMW Z8. However, it is still accessible from the selected car via links, so may be relevant.
- General
General function description for fuel systems. Refer to 16 00 General function description for fuel supply systems .
- Parts designation PARTS DESIGNATION
1. Fuel tank (plastic) 16. Condensate tank 2. Electric fuel supply pump 17. Fuel return line 3. Surge chamber 18. Fuel feed line 4. Suction jet pump 19. Pressure regulator 5. Non-return valve 20. Fuel filter 6. Filler pipe 21. Fuel rail 7. Pressure test line (USA only) 22. Engine control unit 8. Tank cap 23. Tank vent valve 9. Pressure limiting valve 24. Intake manifold 10. Outlet protection valve 25. Purge line 11. Roll-over valve 26. Vent line 12. Service vent line 27. Carbon canister 13. Refueling vent line 28. Evaporation line 14. Pressure holding valve 29. Dust filter 15. Flow restrictor 30. Tank leakage diagnostic module (USA only) - Function description (see also Figure )