On replacement, assemble new part with gaiter
WARNING: This page is about a different car, the 2011 BMW 328xi, 2010 BMW 335xi, 2010 BMW 328xi, 2009 BMW 335xi, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
- Determine measurement (A) to simplify following adjustment of front axle
Installation:
Slacken clamping screw (1) and screw off tie rod end.
Slide gaiter with ear clamp and band clamp on tie rod.
Screw in tie rod end to measurement (A).
Tightening torque 32 21 2AZ .