Adjust toe-in
WARNING: This page is about a different car, the 2011 BMW 328xi, 2010 BMW 335xi, 2010 BMW 328xi, 2009 BMW 335xi, and 2009 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Clean thread on tie rod.
Loosen screw (2).
Turn tie rod (3) and if necessary grip tie rod end (1) to adjust toe-in to setpoint value.
Tighten screw (2).
Tightening torque 32 21 2AZ .
If necessary, correct installation position of gaiter.