84 10 720 Removing and installing/replacing base plate (in center armrest at rear)

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Fold down center armrest
Open upper armrest section

Slide in special tool 00 9 341 as pictured and release catch.

Remove base plate (1) in direction of arrow.

Fig 1: Removing Base Plate

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connections (1) and disconnect, remove base plate.

Installation:

Catches (2) must not be damaged.

Ensure correct routing of cables.

Fig 2: Identifying Plug Connections And Catches

Courtesy of BMW OF NORTH AMERICA, INC.