LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2564 (Restraints - Repair - F01/F02) >> Airbag Generator/Airbag Unit For Passenger >> 72 12... Unlocking/locking airbag plug connections >> Airbag plug connection on gas generator/airbag module offset by 90°

Airbag plug connection on gas generator/airbag module offset by 90°

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

There are two ways of unlocking this airbag plug connection on the gas generator/airbag module:

Method 1: 

Simultaneously pull cover (1) upwards at lugs on left and right (2).

Fig 1: Pulling Cover At Lugs On Left And Right
G06886701Courtesy of BMW OF NORTH AMERICA, INC.

Method 2: 

Insert a narrow screwdriver into recess (1) in housing (2).

Carefully pinch cover (3) off (4).

Fig 2: Pressing Cover Off
G06886702Courtesy of BMW OF NORTH AMERICA, INC.

Cover (1) is not positioned higher than housing (2).

The airbag plug connection is unlocked and can now be detached from the gas generator/airbag module.

Fig 3: Identifying Cover And Housing
G06886703Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

After attaching airbag plug connection to gas generator/airbag module, press cover (1) downwards until it rests flat on housing.

Check that it catches properly.

Fig 4: Pressing Cover On Housing
G06886704Courtesy of BMW OF NORTH AMERICA, INC.