LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2564 (Restraints - Repair - F01/F02) >> Airbag Generator/Airbag Unit For Passenger >> 72 12 060 Removing and installing or replacing left or right head airbag >> Version with screw clips

Version with screw clips

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Release screw (1).

Tightening torque 72 12 2AZ .

Fig 1: Identifying A-Pillar Screw (Version With Screw Clips)
G06886670Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 72 12 2AZ .

Fig 2: Identifying A-Pillar Bracket Screws
G06886672Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque 72 12 2AZ .

Fig 3: Identifying A-Pillar Wiring Mounting Screws
G06886673Courtesy of BMW OF NORTH AMERICA, INC.

UNLOCK AND DISCONNECT  plug (1) for gas generator.

Unfasten screws (2).

Tightening torque 72 12 2AZ .

Remove gas generator.

Installation note: 

Gas generator is coded against incorrect assembly.

Fig 4: Identifying Gas Generator Plug And Screws
G06886674Courtesy of BMW OF NORTH AMERICA, INC.