72 12 050 Removing and installing side airbag (front seat) (vehicles from 07/2012)
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Operations on pyrotechnical devices may only be carried out by authorized experts.
Improper, unauthorized operations may result in serious dangers.
Unauthorized persons are strictly prohibited from performing any operations on this system.
WARNING:
Comply with SAFETY INFORMATION for handling airbag system components.
Incorrect handling can lead to airbag deployment and cause injury.
A damaged airbag must be replaced because its protective function is compromised and, in an extreme situation, it can no longer execute its protective function.
Necessary preliminary work:
- Disconnect BATTERY NEGATIVE CABLE
- Remove rear panel on front seat. See REMOVING REAR PANEL (NORMAL/ELECTRIC SEAT) , REMOVING REAR PANEL (SPORT SEAT) , or REMOVING REAR PANEL (COMFORT SEAT) .
Detach backrest cover (1) in the marked area.
Unlock PLUG CONNECTION (1) and disconnect.
Drill out rivet head (2).
Remove airbag module in direction of arrow.
Feed out airbag module from cover (3).
Installation note:
Fully remove rivet remnants.
Airbag module is coded against incorrect assembly.