63 12 860 Replacing control unit for left xenon headlight (up to production date 07/13)

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Version with xenon lighting system: Danger to life due to high voltage! Therefore disconnect all components from voltage supply before removal.

Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.

Comply with notes on handling HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .

Necessary preliminary tasks:

Remove LEFT HEADLIGHT

Release screws (1).

Tightening torque 63 12 5AZ .

Remove control unit for xenon headlight (2) upwards from headlight (3).

Fig 1: Identifying Headlight And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

When installing control unit for xenon headlight (1), make sure sealing sleeve (2) is correctly seated.

Fig 2: Identifying Sealing Sleeve

Courtesy of BMW OF NORTH AMERICA, INC.