63 14 120 Removing and installing/replacing rear reflector (on rear bumper trim)

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Unclip reflector (1) from bumper trim (2) in area (3).

Pull reflector (1) out of guide and detach towards rear from bumper trim (2).

Fig 1: Identifying Reflector And Bumper Trim In Area

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) and guide (2) on rear reflector must not be damaged.

Fig 2: Identifying Rear Reflector Catches And Guide

Courtesy of BMW OF NORTH AMERICA, INC.