LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2560 (Collision - Body Panel Repair (F01, F02)) >> Rear Trim Panel >> 41 12 548 Replacing Rear Cross Member On Luggage Compartment Floor (Tail Panel Removed) >> Installing Crossmember

Installing Crossmember

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Do not grind new parts and body in area of bonding surfaces.

Clean all  bonding surfaces on new part and on vehicle with cleaning agent R1.

Apply adhesive to bonding surfaces.

Install cross member and secure with blind rivets

After adhesive has hardened: In the connection area of cross member to side member, fit 2 EMC SCREWS  .

scientia non olet · About LEMON Manuals