LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2560 (Collision - Body Panel Repair (F01, F02)) >> Body Repair General Information >> 41 00... Reinforcement Plate (Bonded) >> Notes

41 00... Reinforcement Plate (Bonded): Notes

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

In the case of a partial replacement piece, a body component is cut at a point described in the repair instructions.

A reinforcement plate is bonded in to ensure sufficient strength.

Observe procedures for REPAIR STAGE 2 .

NOTE: The following graphics serve as general illustrations of reinforcement plate repair work. They apply to sectional repairs to the structure.

Mark component in accordance with measurement a and cut.

Fig 1: Identifying Component Cutting Dimension
G06890330Courtesy of BMW OF NORTH AMERICA, INC.