41 00... Quality Standard

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

The overall requirements relating to a vehicle can only be implemented by including "all" components. This applies in particular to the body. With regard to an optimum crash result, it is necessary to maintain the structural measures.
It is absolutely essential to observe the procedures set out in the repair instructions. Any deviation from these procedures will only be permitted after prior consultation with and approval by BMW.

The use of non-approved repair steps or tools may have serious consequences for the structure of the vehicle (e.g. in the event of a crash). In the end, this can result in safety and product liability risks which cannot be calculated.

Corrosion protection measures during and after repairs are absolutely essential to maintain the value of the vehicle.
Use only genuine BMW parts and approved auxiliary devices, materials and operating fluids when carrying out repairs.