66 53 060 Removing and installing/renewing the Top View camera

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove RETAINING RING ON EXTERIOR MIRROR

Unfasten plug connection (1) and disconnect.

Unfasten screws (2).

Remove exterior mirror camera.

Fig 1: Identifying Plug Connection With Screw

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Use of a special tool is no longer required.

Calibration:

Calibration is performed via BMW diagnosis system:
- Service function
- Body
- All-round vision camera
- Calibration of all-round vision camera