LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2558 (Distance Systems, Cruise Control - Repair - F01/F02) >> Night Vision >> 66 54 001 Axially adjusting night vision camera

66 54 001 Axially adjusting night vision camera

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Mechanical setting - as described in the following - is only possible axially  .

Vertical  alignment can only be carried out with the BMW diagnosis system:

  • Service functions:

    -> Driver assistance systems

    -> Night vision electronics

    -> Calibration night vision electronics camera

NOTE: Installation location: Adjusting screw, Night Vision Camera F01, 02, 03:

Fold lid (1) in engine compartment lid gasket fixture mounting upwards as pictured.

NOTE: (2) = Installation location, adjusting screw, night vision camera
Fig 1: Identifying Installation Location And Engine Compartment Lid
G06886558Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: Installation location: Adjusting screw, Night Vision Camera F07, F10, 11, 18, F12, 13:

Fold up engine compartment lid seal (1) as shown.

NOTE: (2) = Installation location, adjusting screw, night vision camera
Fig 2: Identifying Installation Location And Engine Compartment Lid Seal
G06886559Courtesy of BMW OF NORTH AMERICA, INC.
Fig 3: Adjusting Night Vision Camera At Adjusting Screw
G06886560Courtesy of BMW OF NORTH AMERICA, INC.

Front of vehicle must be parallel at distance (A) to headlight aiming device (1).

(A) = 2 m

Align a suitable straight object (2), e.g. a spirit level, horizontally on headlight aiming device.

Slowly carry out axial adjustment of night vision camera at adjusting screw (3).

NOTE: Image shows the CID picture in the vehicle.

If necessary, align the image of the night vision camera with aid of a second person.

Yellow help line (1) is displayed using diagnosis job.

Upper edge (2) must be aligned using adjusting screw parallel to yellow help line (1) in the CID.

Fig 4: Aligning Upper Edge Parallel To Yellow Help Line In CID
G06886561Courtesy of BMW OF NORTH AMERICA, INC.