LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2555 (Seats - Repair - F01/F02) >> Front Seat, Comfort >> 52 17 062 Removing and installing/replacing front left or right lumbar support with valve housing (active seat) >> Overview of lumbar support with valve housing

Overview of lumbar support with valve housing

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Lumbar Support With Valve Housing
G06895586Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Check lumbar cushion for damage.

Make sure lumbar support is correctly fitted on fourth spring wire from below.

Air hoses must not be kinked.

Make sure valve housing is correctly seated.

NOTE: Carry out FUNCTION TEST .
scientia non olet · About LEMON Manuals