Performing initialization

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Move side window to upper end position
Pull and hold switch in "Close one-touch operation" (2nd switch position) during the entire process.

NOTE: Re-initialization was successful if one-touch control function and anti-trapping protection function flawlessly.

Alternatively, initialization of the power window regulation can also be carried out via the Service function in BMW ISTA.

Selection via:

Body
- Locking and security functions
  - Power windows
    - Initialize power windows