LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2550 (Engine And Gearbox Mounting - Repair - F01/F02) >> Cross-Member For Transmission Mounting >> 2232050 Replacing cross-member for transmission mounting (N63) >> Necessary preliminary work

Necessary preliminary work

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1) and (2).

Remove transmission cross member.

Tightening torque 22 32 3/4AZ .

Fig 1: Identifying Transmission Mounting Screws
G06894851Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals