51 24 133 Removing and installing/replacing Automatic Soft Close drive on rear lid (Automatic Soft Closing)

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove TRIM FOR REAR LID

Disconnect plug connection (1).

Release screws (2) and feed out drive (3).

Tightening torque 51 24 4AZ .

Fig 1: Identifying Plug Connection And Screws And Drive

Courtesy of BMW OF NORTH AMERICA, INC.

Feed Bowden cable out of REAR LID LOCK .

Installation note:

Make sure Bowden cable (1) is correctly positioned in rear lid.

Lay Bowden cable (1) without kinks.

Fig 2: Identifying Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.