2. General notes
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
- Use only the BMW-approved anti-friction agent for fitting
- Application only at room and object temperatures between 18 and 25 °C
- Lubricant dries at different rates depending on the quantity, temperature and ventilation and becomes sticky
- Lubricant can only be used for fitting and not for fault elimination (e.g. grating)
- Newly painted parts may only be brought into contact with the anti-friction agent after cooling
- Optimal bonding/attachment to the background surface is achieved after approx. 48 hours. The window guide seal must not be exposed to mechanical strain beforehand (car wash, strength test, etc.).
IMPORTANT:
To avoid unwanted noises, do not use soapy water (low-surface-tension water with washing-up liquid) or lubricant containing silicone