Pressure converter, cylinders 5-8

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect plug connection (1) on pressure converter.

Installation note:

Plug connection (1) must snap audibly into place!

Disconnect black vacuum hose at connection (VAC = vacuum reservoir).

Disconnect black/blue vacuum hose at connection (OUT= turbocharger vacuum unit).

Fig 1: Identifying Black/Blue Vacuum Hose Connection With Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (2).

Tightening torque 11 65 8AZ .

Remove pressure converter.

Check activation via BMW diagnosis system.