LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2547 (Engine - Repair - F01/F02) >> 1165 Supercharger With Control >> 1165025 Removing and installing/replacing exhaust turbocharger, right, cylinders 1-4 (N63) >> Replace all sealing rings

Replace all sealing rings

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Oil Line With Banjo Bolt And Screw
G06888880Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque 11 53 3AZ .

Release banjo bolt (2).

Tightening torque 11 53 2AZ .

Lay coolant return line (3) to one side.

Installation note: 



Fig 1: Identifying Coolant Return Line With Banjo Bolt And Screw
G06888881Courtesy of BMW OF NORTH AMERICA, INC.

Open hose clamp (1).

Detach coolant feed line (2).

Installation note: 

scientia non olet · About LEMON Manuals