LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2547 (Engine - Repair - F01/F02) >> 1151 Water Pump With Drive >> 1151000 Removing and installing/renewing coolant pump (N63) >> Replace gasket

Replace gasket

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

If reusing the coolant pump: 

If a coolant pump is reused, it must be mechanically rotated once (breakaway torque at pump impellers).

One coolant pump rotation will be sufficient.

If replacing the coolant pump: 

Release screws on coolant thermostat.

Tightening torque 11 53 1AZ .

Remove coolant thermostat.

Installation note: 

scientia non olet · About LEMON Manuals