Necessary preliminary work
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
(cylinder bank 5 to 8)
- Remove LEFT INLET CAMSHAFT .
- Remove left EXHAUST CAMSHAFT .
IMPORTANT:
Used rocker arms (1) may only be reused in the same position.
Tolerance classes are not required.
Tolerance classes are not required.
Remove rocker arm (1) and set down in neat order in special tool 11 4 480 .
Install rocker arm (1).
Align all rocker arms (1) straight.
Assemble engine.