Necessary preliminary work
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
- Remove ACOUSTIC COVER
- Disconnect NEGATIVE BATTERY TERMINAL
- Release battery positive terminal
- Remove right INTERCOOLER
- Remove INTAKE FILTER HOUSING
- Disconnect FUEL FEED LINE
- Detach wiring harness for injectors and lay to one side
- Remove IGNITION COILS , cylinders 1-4
- Remove INJECTORS , cylinders 1-4
- Remove HIGH-PRESSURE PUMP
Release screws (1).
Tightening torque 11 12 9AZ .
Remove oil filler neck (2).
Installation note: