LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2547 (Engine - Repair - F01/F02) >> 1100 Engine, General >> 1100670 Securing engine in installation position (N63) >> Notes

1100670 Securing engine in installation position (N63): Notes

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Danger of injury!
Observe following instructions relating to special tool: 
  1. Prior to each use, check the special tools for defects, modifications and operational reliability.
  2. Damaged/modified special tools must not be used!
  3. No changes or modifications may be made to the special tools!
  4. Keep special tools dry, clean and free of grease.
IMPORTANT: Before lifting the engine, check the lifting lugs for damage (cracks) and to ensure they are seated securely.
NOTE:
  • Numbering system for special tools has been re-encoded.
IMPORTANT: Special tool 00 6 000 must not be fitted when transverse member (1) is installed!
Fig 1: Identifying Transverse Member
G06888422Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals