LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2545 (Heating And Air Conditioning - Repair - F01/F02) >> Heater With Operation >> 64 11 906 Removing and installing/renewing ventilation temperature sensor (center fresh-air grille)

64 11 906 Removing and installing/renewing ventilation temperature sensor (center fresh-air grille)

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Disconnect plug connection (1).

Turn temperature sensor (2) on plug socket in direction of arrow as far as it will go.

Remove temperature sensor (2) from center fresh-air grille (3).

Installation note: 

Pay attention to lead sequence.

Make sure temperature sensor (2) is correctly engaged in middle fresh-air grille (3).

Fig 1: Turning Temperature Sensor On Plug Socket
G06886163Courtesy of BMW OF NORTH AMERICA, INC.