I. Part replacement as preliminary work fur further repair work and part replacement based on gradual leakage
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
(minor leak, e.g. hairline crack)
Procedure:
- DRAW OFF A/C system, then determine drawn-off refrigerant oil quantity
- Carry out part replacement
- Replace removed refrigerant fluid and additionally top up with new refrigerant fluid according to components replaced:
- Compressor: refer to NOTES ON REPLACING COMPRESSOR
- Evaporator: 10 ml
- Capacitor: 20 ml
- Desiccant insert/dryer flask: 20 ml
- Each replaced refrigerant line: 10 ml
- Capacitor with integrated dryer: 40 ml
- Safety pressure switch and seals: no additional refrigerant fluid
- EVACUATE AND FILL A/C system