LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2544 (Trailers - Repair - F01/F02) >> 8621 Hood >> 86 21... Removing hinge bracket on rear lid >> Notes

86 21... Removing hinge bracket on rear lid: Notes

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Remove rear lid, refer to REMOVING LID. 
Remove gas spring, remove gas spring on hinge side only, refer to REMOVING GAS SPRING. 

Raise edge (1) of retaining clip (2) and slide in direction of arrow towards rear.

Fig 1: Sliding Retaining Clip
G06886911Courtesy of BMW OF NORTH AMERICA, INC.

Remove plastic washer (1). Pull hinge bracket (2) in direction of arrow out of mounting bracket (3).