LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2542 (Engine Electrical System - Repair (N63)) >> 1261 Oil Pressure/Oil Temperature/Oil Gauge >> 12 61 280 Removing and installing/replacing oil pressure sensor (N63) >> Installation location

Installation location

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2014 BMW Alpina B7L. However, it is still accessible from the selected car via links, so may be relevant.

Oil pressure sensor is located next to the oil filter housing.

Engine oil may emerge when oil pressure sensor is replaced; have a cleaning cloth ready.

Unlock plug (1) and remove.

Release oil pressure sensor (2).

Tightening torque 12 61 1AZ .

Installation: 

Check engine oil level. Top up engine oil if level is too low.

Fig 1: Identifying Oil Pressure Sensor And Plug
G06889037Courtesy of BMW OF NORTH AMERICA, INC.