LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2540 (Cooling System - Repair - F01/F02) >> 1711 Engine Radiator With Attachment >> 1711000 Removing and installing radiator (N63, N74) >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2014 BMW Alpina B7L, 2014 BMW Alpina B7, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Tightening torque 17 10 6AZ .

Detach A/C lines (2) and place to one side.

Fig 1: Identifying A/C Line With Mounting Screws
G06889271Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Replace sealing rings.

Release screws (1) on left and right from cover (3).

Tightening torque 17 10 1AZ .

Release screws (2) behind sealing lip.

Tightening torque 17 10 1AZ .

Lift out cover (3).

Fig 2: Identifying Radiator Cover With Mounting Screws
G06889272Courtesy of BMW OF NORTH AMERICA, INC.

Remove radiator (1) towards top.

Fig 3: Removing Radiator Towards Top
G06889273Courtesy of BMW OF NORTH AMERICA, INC.

Reassemble the vehicle.

Fill A/C SYSTEM .

Check COOLING SYSTEM  for leaks.