LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2539 (General Electrical System - Repair - F01/F02) >> Windscreen Wipers >> 61 61 010 Checking contact angle of windscreen wiper arms on front windscreen

61 61 010 Checking contact angle of windscreen wiper arms on front windscreen

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Precisely adjusting the contact angle of the wiper arms is crucial to determining wiping quality.
IMPORTANT: Wiper arms are only checked and not adjusted. ADJUSTMENT DIMENSIONS 

Remove wiper blade (1) from wiper arm (2).

Pin (3) is locator for special tool 61 6 100 .

Fig 1: Identifying Wiper Blade, Wiper Arm And Pin Of Special Tool (61 6 100)
G06895133Courtesy of BMW OF NORTH AMERICA, INC.

Slide special tool 61 6 100 onto pin (1).

Place special tool 61 6 100 on windscreen (2) and read off value in degrees on scale.

NOTE: LHD vehicles are covered by the scale range of 0 to -5 and RHD vehicles by the scale range of 0 to +5.
Fig 2: Sliding Special Tool (61 6 100) Onto Pin
G06895134Courtesy of BMW OF NORTH AMERICA, INC.