61 31 334 Removing and installing or replacing grip trim for gear selector switch (up to 08/2011)

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

Carefully unclip knob cover (1) using special tool 00 9 322 on points (2) from gear selector switch (3) and remove in the direction of arrow.

Fig 1: Removing Gear Selector Switch Knob Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) must not be damaged during removal.

Fig 2: Identifying Gear Selector Switch Knob Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Engagement lugs (1) and guide (2) must not be damaged.

Fig 3: Identifying Engagement Lugs And Guide

Courtesy of BMW OF NORTH AMERICA, INC.