61 35 095 Removing and installing control unit/module for seat heating (rear seat)

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2015 BMW Alpina B7L, 2015 BMW Alpina B7, 2015 BMW 750i, 2015 BMW 750Li, and 2015 BMW 740i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

Remove REAR SEAT

Disconnect plug connection (1).

Unclip clip (2) and remove control unit for seat heating (3).

Fig 1: Identifying Clip, Plug Connection And Control Unit For Seat Heating

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure mount (1) and retaining lugs (3) of control unit for seat heating (2) are correctly seated.

Fig 2: Identifying Mount, Retaining Lugs And Control Unit For Seat Heating

Courtesy of BMW OF NORTH AMERICA, INC.